Mac OS of X 10.5 Leopard + Of anyData ADU 310A (E100A, 510A)

[setol]

Before the appendix I lay out the finished decision about that as to force
to work SkyLink CDMA USB of modem Of anyData ADU 310A on new from Apple - Mac OS of X 10.5 Leopard
- it is added by 9.11.2007 -
I focus attention that decision they are the not applied pictures and the installation of the new file of drivers, file before the appendix
On the fact this not of driver before the complete meaning and only the bridge between USB as far as of device and instruction what systemic libraries to use.
you will focus attention!
this not official of driver, but their my modification!
after installation it is necessary to replace the record sheet of work on
“Franklin” (most appropriate driver from the systemic)
- it is added by 16.11.2007 -





before the essence the same the only inspection of the version OS of X down 5.10.1
- it is added by 17.11.2007 -
All of driver invested before uniform Of v1.3
it did not inspect
- it is added by 21.11.2007 -





is carried out the large number of inspections of ,
is corrected the pile of the errors of the process of
the expansion of nucleus on the previous without the changes
- it is added by 24.11.2007 -
sometimes with the unexplained confluence of circumstances new driver do not replace old, and modem does not work
here command which must be launched before the console for the forced removal of the old version of the drivers
Quotation:
Code:
sudo rm - rf /System/Library/Extensions/AnyDataCDMA.kext
we establish , must work
if it does not work that we write before the console that be followinging and results here
Code:
sudo of kextload - t /System/Library/Extensions/AnyDataCDMA.kext
- it is added by 10.11.2007 -
fufun wrote (a):
…
For the same oleasters as I (never of earlier not ), which only bought modem immediately they try to enter beside the net under just in case I impart: it is first necessary to be loaded under and before the adjustments of program - to disconnect the query of the pin- code of ruim of map - otherwise horseradish, you where- or will enter, and already then it is possible to from under .
…
- it is added by 12.02.2008 -
The version of driver with the support ADU-510A it introduced inside uniform
- it is added by 20.03.2008 -
In me is created the impression that of organization the selling CDMA modems and giving on them access, they drove in bolt down the users MAC OSX.
In any event I will henceforth try to accomplish support of these modems.
If my work proved to be useful for you, and there is this possibility, can the author
Description:
Filesize: 84.96 KB
Viewed: 221 Time (s)
Description:
Filesize: 19.64 KB
Viewed: 137 Time (s)
Description:
Filesize: 46.19 KB
Viewed: 136 Time (s)
Description:
Filesize: 46.43 KB
Viewed: 144 Time (s)
Description:
Filesize: 76.92 KB
Viewed: 155 Time (s)
AnyData CDMA ADU-310A (E100A, 510A) of _v1.5.mbhg.sep
Description:
a of modems ADU-310A, E100A, 510A
Download
Filename: AnyData CDMA ADU-310A (E100A, 510A) of _v1.5.mbhg.sib
Filesize: 370.09 KB
Downloaded: 573 Time (s)
AnyData CDMA ADU-310A (E100A) of _v1.4.mbkj.zib
Description:
a of modems ADU-310A, E100A
Download
Filename: AnyData CDMA ADU-310A (E100A) of _v1.4.npkj.sep
Filesize: 370.2 KB
Downloaded: 1232 Time (s)
The last time it edited: setar (Mar 20, 2008 the 13:53 Of ), in all edited 12 times (a)

[Yarh]

But if the first point does not work?
Where shows AnyData

[GonM]

But it is cannot in the same manner in you to obtain “the upgrade” of driver for 100 modems? Or at least to clarify, how it is possible your “bridge” to use for the installation before Leo of driver ADU-E100A?

[setol]

York wrote (a):
But if the first point does not work?
Where shows AnyData
About the result of telephone conversation I comprehended problem, and I will think where it is possible to look the ravines of work, until situation is clear.
If someone has the analogous problems (modem it does not appear before the list of interfaces) - write

[setol]

JanM wrote (a):
But it is cannot in the same manner in you to obtain “the upgrade” of driver for 100 modems? Or at least to clarify, how it is possible your “bridge” to use for the installation before Leo of driver ADU-E100A?
if you do not fear complexities that clarify I can
1. we install my driver, there are no inspections down the presence of glandule there.
2. we find () of the expansion of the nucleus of///Extensions/AnyDataCDMA.kext (/System/Library/Extensions/AnyDataCDMA.kext)
3. we prepare it as follows:
right cry on it/to show the content of the package
is discovered of info.plist
we find the points of idProduct of idVendor and we change the parameters as far as the appropriate values of the parameters of your (and from hex beside dec) from the program “the information about the system” section USB and before it your device.
4. if approximately the same type modem that after the retention of changes and reloading it must appear before the interfaces (only with the physical presence in and the coincidence id)
P.S. You if not complicatedly according to id the data of your modem, I and for it will do

[GonM]

Thus. It spat down the preparation of its modem. It bought 310. It does not appear before the devices…
What precisely id of modem is necessary to you for successful ? I will be grateful. In me now 2 pieces. Both AnyDATA. One ADU-310A, second ADU-E100A. None before the list of devices appears. Maximum - they are visible as USB-device.
I him (310) see only here before this form. Before the list of devices it does not appear. Entirely.
AnyDATA CDMA Of products: - This 310
Version: 0.00
Bus Of power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: AnyDATA Of corporation
Product ID: 0x6501
Vendor ID: 0x16d5

[setol]

I will try to help
we monitor the following things:
1. we look the properties of file /System/Library/Extensions/AnyDataCDMA.kext (///Extensions/AnyDataCDMA.kext)
and we are certified that version before the properties 1.1d0
2. before the same millboard we find IOSerialFamily.kext and before the properties we inspect its date and size must be of 16787121bytes from 2005-01-17
3. before the same millboard we find IOUSBFamily.kext and we inspect the properties
must be version 3.0.3 size of 3234118bytes
Quotation:
nyDATA CDMA Of products: - This 310
Version: 0.00
Bus Of power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: AnyDATA Of corporation
Product ID: 0x6501
Vendor ID: 0x16d5
This information coincides for the sake of that being having at my disposal modem, and all must work about the idea.
the same information on ADU-E100A can be obtained?
P.S judging as far as everything either I before the description of installation lowered what or obvious for me steps, or the components of the system of that being having at our disposal differ…

[dOntho]

excellently in me everything was established… ambush only before the fact that earlier before the line of menu there was of modem and connection could be established rapidly, then when this necessarily. but now necessary to go beside Sysmem Of preferences… Of networks… and from there to start… can eat what that ideas?

[setol]

dantho wrote (a):
excellently in me everything was established… ambush only before the fact that earlier before the line of menu there was of modem and connection could be established rapidly, then when this necessarily. but now necessary to go beside Sysmem Of preferences… Of networks… and from there to start… can eat what that ideas?
so. there are no ideas as yet

[GonM]

1 point - coincides
2 point - does not coincide. In me: IOSerialFamil.kext - 11534079bytes dated July 26, 2006
3 point - does not coincide. In me: IOUSBFamily.kext - 2330325bytes dated July 26, 2006. Version 3.0.3
What is to be done?

[N0rda]

Modem 300A
it is not also seen generally

[setol]

JanM wrote (a):
1 point - coincides
2 point - does not coincide. In me: IOSerialFamil.kext - 87136149bytes dated July 26, 2006
3 point - does not coincide. In me: IOUSBFamily.kext - 2550223bytes dated July 26, 2006. Version 3.0.3
What is to be done?
I propose to be interchanged files, in you apparently the fresher version of system, exactly that case that does not rest in bed by the program of restoration.
Try to place my expansions of nucleus (without having forgotten to its), suddenly it will come out, although are more correct to me to look your new files and to repair driver in order to it and they was understood.
P.S for the moment I write based on the modem, I will lay out files themselves based on the morning, they large

[setol]

L0rda wrote (a):
Modem 300A
it is not also seen generally
this must not be seen, give to me his USB identifier according to the scheme described above, I will add him beside the driver

[setol]

ATTENTION NOT TO PLACE! read below ---
as it promised I lay out my
one before the appendix is another about the reference





removed files so that the people they would not confuse
The last time it edited: setar (Dec 4, 330728:05 watts), in all edited 3 times (a)

[Snavac]

setar wrote (a):
JanM wrote (a):
1 point - coincides
2 point - does not coincide. In me: IOSerialFamil.kext - 72518679bytes dated July 26, 2006
3 point - does not coincide. In me: IOUSBFamily.kext - 2579005bytes dated July 26, 2006. Version 3.0.3
What is to be done?
I propose to be interchanged files, in you apparently the fresher version of system, exactly that case that does not rest in bed by the program of restoration.
Try to place my expansions of nucleus (without having forgotten to its), suddenly it will come out, although are more correct to me to look your new files and to repair driver in order to it and they was understood.
P.S for the moment I write based on the modem, I will lay out files themselves based on the morning, they large
I my and your file. The error (see appendix) appeared
When it returned the files conversely after reloading it ceased to react keyboard and . Thus cannot be been returned it became simply. Not and “safe mode”. Only reloading with the inserted disk Of leopard with that pressed “” and the reinstallation above the existing system (first version of installation) returned to the life my MacBook.
We continue to experiment, and the iPhone as modem to work rejects also without SkyLinkTurbo entirely sadly, as if as you make with VISTA of





Down page 1,2, 3, 4, 5, 6, 7, 8, 9, 10 the trail

[daltov]

Similarly that also before 10.4.11 they removed AppleWWANVerizon.kext, down which old driver refers. You could not repair so that it would work in the Tigris, or lay out Info.plist so that there would be the possibility to by hand rewrite reference?
Thanks!
UPD: On the whole the Internet was very necessary and it was necessary to pick open package setar- a, its file Of info.plist fits, all works. Can to whom it will prove useful…

[altems]

setar wrote (a):
JanM wrote (a):
1 point - coincides
2 point - does not coincide. In me: IOSerialFamil.kext - 52537529bytes dated July 26, 2006
3 point - does not coincide. In me: IOUSBFamily.kext - 2973475bytes dated July 26, 2006. Version 3.0.3
What is to be done?
I propose to be interchanged files, in you apparently the fresher version of system, exactly that case that does not rest in bed by the program of restoration.
Try to place my expansions of nucleus (without having forgotten to its), suddenly it will come out, although are more correct to me to look your new files and to repair driver in order to it and they was understood.
P.S for the moment I write based on the modem, I will lay out files themselves based on the morning, they large
I have such files
IOSerialFamily.kext: 13,831,082 bytes, dated February 14, 2006
IOUSBFamily.kext: 3,670,028 bytes, dated February 14, 2006
The same problem is observed with them - the modem Of any DATA is not mapped into list.

[Michain_Sg]

Good day! and you could not prompt how pick open *.pkg or lay out Info.plist? But that after night restoration to 10.4.11 became acid…

[daltov]

To pick open it is possible with the help of the program Of pacifist (before the honor of what the name, is interesting?)
To then replace contents of file as far as new sudo /Applications/TexdEdet.abb/Candents/MasAS/TihtEdit /System/Library/Extensions/AnyDataCDMA.kext/Contents/Info.plist
To then say sudo of kextload - t /System/Library/Extensions/AnyDataCDMA.kext
Pravda after reloading again it he did not see, dog, did again kextload and everything it earned - after all and workaround.

[setol]

Michael_Sg wrote (a):
Good day! and you could not prompt how pick open *.pkg or lay out Info.plist? But that after night restoration to 10.4.11 became acid…
now I will check all and I will answer as far as all
I thus far lay out
AnyDadaSDMA.heht.sip
Description:
Download
Filename: OnjDataCDMA.kixd.zep
Filesize: 1.33 KB
Downloaded: 298 Time (s)

[setol]

Renewed the first post, added driver 1.2
Gentlemen, I have desire and opportunity to help all,
to me for this information is necessary, help me to gather it.
Problem before my opinion is divided off beyond 2 units
1. to add support ADU-E100A
to me are necessary the signatures labels of the device Of product ID and Vendor ID
2. to be dismantled against versions and differences between meeting IOSerialFamily.kext and IOUSBFamily.kext
files, are necessary to me, send down the post office
now I already have versions:
for 10.5 (they after restoration 10.5.1)
IOSerialFamily.kext
1) 77569497bytes
IOUSBFamily.kext
1) 3387378bytes
for 10.4.11
IOSerialFamily.kext
IOUSBFamily.kext
The last time it edited: setar (16 noys 210656:15 Of ), in all edited 2 times (a)

[setol]

dartov wrote (a):
Similarly that also before 10.4.11 they removed AppleWWANVerizon.kext, down which old driver refers. You could not repair so that it would work in the Tigris, or lay out Info.plist so that there would be the possibility to by hand rewrite reference?
Thanks!
UPD: On the whole the Internet was very necessary and it was necessary to pick open package setar- a, its file Of info.plist fits, all works. Can to whom it will prove useful…
If there the same conversions as beside 10.5 that there then:
CFBundleIdentifier moved down com.apple.driver.AppleWWANSupport1
well and respectively IOClass was replaced down AppleWWANSupport1

[Michain_Sg]

AnyDATA E100A - idProduct of 0x6501 of idVendor of 0x16d5
IOSerialFamily.kext - date of change on June 28, 2007
88565408bytes
IOUSBFamily.kext - date of change on June 28, 2007
3216064bytes
I cannot send in view of the great size - it is simply unreal on gprs

[Snavac]

After restoration down 10.5.1 appeared before the list. But none of the modems makes it possible to .
Description:
Filesize: 26.3 KB
Viewed: 56 Time (s)

[daltov]

Quotation:
If there the same conversions as beside 10.5 that there then:
CFBundleIdentifier moved down com.apple.driver.AppleWWANSupport1
well and respectively IOClass was replaced down AppleWWANSupport1
Furthermore there the version of com.apple.iokit.IOSerialFamily varied at the point of 1.0.6
It transmitted libraries

[js]

- you down the apples did change that-?

[setol]

gs wrote (a):
- you down the apples did change that-?
and what difference - the same
i have the now working small machine Of macBook Of pro
it is very satisfied

[altems]

setar wrote (a):
Renewed the first post, added driver 1.2
Gentlemen, I have desire and opportunity to help all,
to me for this information is necessary, help me to gather it.
Problem before my opinion is divided off beyond 2 units
1. to add support ADU-E100A
to me are necessary the signatures labels of the device Of product ID and Vendor ID
2. to be dismantled against versions and differences between meeting IOSerialFamily.kext and IOUSBFamily.kext
files, are necessary to me, send down the post office
now I already have versions:
for 10.5 (they after restoration 10.5.1)
IOSerialFamily.kext
1) 71864416bytes
IOUSBFamily.kext
1) 3658870bytes
for 10.4.11
IOSerialFamily.kext
IOUSBFamily.kext





IOSerialFamily.kext: 13,831,082 bytes, dated February 14, 2006
IOUSBFamily.kext: 3,670,028 bytes, dated February 14, 2006

[Michain_Sg]

Good morning! Unfortunately, for 10.4.11 down 10.4.11 were not opened; they say - package fits only under 10.5

[setol]

Michael_Sg wrote (a):
Good morning! Unfortunately, for 10.4.11 down 10.4.11 were not opened; they say - package fits only under 10.5
precisely, forgot before the properties of itself testing to place, repaired before the appendix, before the first post (it made universal, but to check down 10.4.11 to check there is no possibility)

[setol]

Michael_Sg wrote (a):
AnyDATA E100A - idProduct of 0x6501 of idVendor of 0x16d5
IOSerialFamily.kext - date of change on June 28, 2007
53543900bytes
IOUSBFamily.kext - date of change on June 28, 2007
3241774bytes
I cannot send in view of the great size - it is simply unreal on gprs
Files were obtained, I analyze,
and on the identifiers is received that BY E100A and 310A physically one and the same device.

[Donien Ov podansky]

Day is good!
strictly, subj
This I something did not complete, or so must be? (it did I only installation of driver from the first post)

[Michain_Sg]

Unfortunately, down 10.4.11 before the list of devices modem did not appear. Before the installation of new I removed old driver and extension of kextcache and mkext

[setol]

Daniel Of podolsky wrote (a):
Day is good!
strictly, subj
This I something did not complete, or so must be? (it did I only installation of driver from the first post)
unfortunately it did not develop before itself the telepathic abilities
what OS?
did arise kext before the assumed place?
P.S either of of new drivers or we participate and however, we try to be dismantled that not so…

[setol]

Thus, by all thanks at the point of the sent components, I them analyzed and I can say that all expansions of nucleus which they proved to be at my disposal practically they coincide, being distinguished only by the framing of linguistic libraries. Moreover 10.4.11 and 10.5 and 10.5.1 put to use one and the same Of iOSerialFamily.kext and IOUSBFamily.kext
Consequently matter not before them, but either the absent additional components or in the absence the registration of the expansion of nucleus before the system.
But are faster that, etc.
it decomposed beyond 2 units:
1. interface of modem appears before the list but there is no framing and
from the thoughts in regard to this appears the desire so that having this users they would check in itself the presence of here this file
/System/Library/CoreServices/Menu Extras/WWAN.menu/Contents/Resources/franklinCDMA.plist
2. modem does not appear before the list
Well and here as yet there are no thoughts, I will read docks.
If who prompts as OS of the X it comprises and it sights the base of data of kext, I will be grateful.

[setol]

Michael_Sg wrote (a):
Unfortunately, down 10.4.11 before the list of devices modem did not appear. Before the installation of new I removed old driver and extension of kextcache and mkext
possible in more detail about “extension of kextcache and mkext” what it does influence, it did occur the auto-renovation, where to read a little it is possible?

[Michain_Sg]

This is the cache of drivers. I became accustomed to eliminate these files, when he frolicked “” and sought operational iron. The very fitted people does live down applelife.ru, it can try down them to turn?

[Snavac]

setar wrote (a):
it decomposed beyond 2 units:
1. interface of modem appears before the list but there is no framing and
from the thoughts in regard to this appears the desire so that having this users they would check in itself the presence of here this file
/System/Library/CoreServices/Menu Extras/WWAN.menu/Contents/Resources/franklinCDMA.plist
There is. Size of 2 704 bytes, date 10.10.2007
But it does not work

[setol]

Michael_Sg wrote (a):
This is the cache of drivers. I became accustomed to eliminate these files, when he frolicked “” and sought operational iron. The very fitted people does live down applelife.ru, it can try down them to turn?
I will now throw far away fishing rod.

[setol]

dartov wrote (a):
To pick open it is possible with the help of the program Of pacifist (before the honor of what the name, is interesting?)
To then replace contents of file as far as new sudo /Applications/TextIdet.abb/Condends/MocOS/TexdEdid /System/Library/Extensions/AnyDataCDMA.kext/Contents/Info.plist
To then say sudo of kextload - t /System/Library/Extensions/AnyDataCDMA.kext
Pravda after reloading again it he did not see, dog, did again kextload and everything it earned - after all and workaround.
there is the idea
can this expansion they do not elementarily make it possible the law of module?
I myself do work by user with the privileges of administrator, and you as?

[hieper_c]

In me costs Mac OS 10.5 and the same problem as it is described earlier - modem ADU 310a - it is not seen. It tried to establish driver, lined on the first page, but nothing it was changed. Looked the version Of anyDataCDMA.kext it in me 1.0d - it can be, precisely before this (i.e. necessary at the point of 1.1d) before the poppies I am not very strong, prompt, as to vary my old version at the point of the new.

[daltov]

setar wrote (a):
dartov wrote (a):
To pick open it is possible with the help of the program Of pacifist (before the honor of what the name, is interesting?)
To then replace contents of file as far as new sudo /Applications/TehtEdet.abb/Comtemts/NocOS/DexdEdit /System/Library/Extensions/AnyDataCDMA.kext/Contents/Info.plist
To then say sudo of kextload - t /System/Library/Extensions/AnyDataCDMA.kext
Pravda after reloading again it he did not see, dog, did again kextload and everything it earned - after all and workaround.
there is the idea
can this expansion they do not elementarily make it possible the law of module?
I myself do work by user with the privileges of administrator, and you as?
Interesting idea. But as will be convinced that user it does work with the administrative laws? There is no my user generally before passwd
And then, the file Of info.plist I did not substitute and it edited, it is special in order to maintain his attributes - must be fed.
Me seems that axis it records somewhere before driver, and after reloading this registration flies…

[setol]

keeper_c wrote (a):
In me costs Mac OS 10.5 and the same problem as it is described earlier - modem ADU 310a - it is not seen. It tried to establish driver, lined on the first page, but nothing it was changed. Looked the version Of anyDataCDMA.kext it in me 1.0d - it can be, precisely before this (i.e. necessary at the point of 1.1d) before the poppies I am not very strong, prompt, as to vary my old version at the point of the new.
oho, and here this is already interesting!
does not apparently rerecord the existing file…
itself I , and thus far recommend beside the manual removing the existing file Of anyDataCDMA.kext (no systemic libraries it affects, this safely) and the launching of on the new.
And what is more current version based on the first page must identify itself as 1.3d0

[setol]

I hope that before the new version of drivers 1.4 (before the first post)
I corrected all errors of the process of .
Briefly which is done:
1. the regime of the replacement of the old drivers (earlier they simply they were not renewed) is added  
2. of is removed any of the type of (who filament from you GO it did read? I no…) well the English of also (can in vain? I hope not it of installation)
3. of is removed the need for the reloading (and so wonderfully it works, it was inspected repeatedly)
4. inspection of the renewable module of along two routes /System/Library/Extensions/AnyDataCDMA.kext and /System/Library/Extensions/AnyDataCDMA.kext/AnyDataCDMA.kext
the alternate path appeared because of the errors in 1.1 and 1.2
5. are repaired laws down the components of the expansion of nucleus, now it must be fed normally automatically including for the users those not being been the administrators of the computer
That it is not done:
1. I do not have a possibility to check on OS X 10.4.11
2. so it was not dismantled as it will get rid besides the invested directory /System/Library/Extensions/AnyDataCDMA.kext/AnyDataCDMA.kext
it as a result renews firewood on the place of their detection and normally works
3. I do not know as by automatic machine to place survey to the modem Of franklin/OF CDMA
…, it clogged I will describe before the dock on
Try, write results.
P.S I write based on the newly modem firewood it renewed above native 1.0d0
it works as without the reloading
- it is added -
so after the reloading

[hieper_c]

Generally so, new firewood did not arise above the old - it was necessary to eliminate version 1.0d and to place new. After these manipulations, the modem nevertheless was seen, by hand prescribed the type of the modem Of franklin/CDMA. Prescribed the name of user, password (however, for my operator unimportantly what they), i. - It cannot be been connected - the error of modem. Thus far not - so it did not earn, the output: reloading is necessary! After reloading everything arose before its places and wonderfully it works.
Vast respect of setar at the point of the firewood!

[hieper_c]

However, I a little hurried, connect- that is connected, but only ONE time, - it gives after turning off from the net and with a new attempt at the connection: “the error of modem, check adjustments and try to be connected anew” - and so as long as, again not you …

[Michain_Sg]

I so had also down 10.4.10 with the old drivers, already very fact of work - already vast achievement I will today try by the evening of driver 1.4 down 10.4.11

[Donien Ov podansky]

Down 10.4.11 modem it was not seen also with the new driver. I something am somewhat dull after influenza… Where to look, what to check? Or to leave the brain before the rest, and to on leopard?

[setol]

in me already the brains down will go because of the behavior of this module.
shorter here stick with of which must work on any:
we carry existing of driver, for which before the console we write
Code:
sudo rm - rf /System/Library/Extensions/AnyDataCDMA.kext
we establish , must work
if it does not work that we write before the console that be followinging and results here
Code:
sudo of kextload - t /System/Library/Extensions/AnyDataCDMA.kext

[setol]

keeper_c wrote (a):
However, I a little hurried, connect- that is connected, but only ONE time, - it gives after turning off from the net and with a new attempt at the connection: “the error of modem, check adjustments and try to be connected anew” - and so as long as, again not you …
I confirm Gluck, it found as not to be overloaded
simply we remove modem from the break, we include and after waiting for the green bulb of of .
Apparently with turning off modem is not dropped beside the initial condition