OKI MC360 - The Multifunction Device Not For Home Use

The model is intended for small working groups, wheretargeted for use in working groups is equipped with an
bulky devices are familiar. The housing of the printer isautomatic documents feeder of increased capacity of
made of plastic panels of two colors - gray and white.50 sheets.
All panels are unpainted, with a rough surface, whichThe warm up time of the scanner is quite fast - just 2
makes the body completely dirt-resistant. Absence ofseconds, and if the device is into sleep mode, the
gloss elements makes the casing very practical, andwarm up time increases up to 6 seconds, which isn't
no objections raises about the quality of assembly. Inmuch either. The performance is impressive, but not
general, the device looks reliable.limited to high-speed scanning: if the transmission
On the face of printer, there is a hinged envelopechannel is not handling the volume of data, then
feeder with the ability to adjust the size of the insertedscanning process is not suspended, but uploaded to
media. At the bottom is the main tray that allows youmemory and is then completed in normal mode.
to set different media formats and can accommodateThe time required for the OKI MC360 to get ready for
up to 250 sheets.work is relatively small. The duration of heating, even
In the upper block of the front panel is located the USBwhen exiting sleep mode does not exceed 60
port to connect flash memory drives. There is also theseconds, and in power saving mode the heating time is
control panel with a small monochrome LCD display.no more than 40 seconds. Removing the jammed
There is no dedicated output tray, its duties arepaper is very simple, because the rear has a door
performed by top panel of the printer, whichhiding the pulling mechanism, and the insides are
accommodates up to 150 sheets.removed in seconds.
At the bottom of the rear panel there are a powerIn monochrome mode, the printer produces 20 pages
supply connector, a USB port, a RJ-45 networkper minute, just like the manufacturer states. When
connector, a pair of RJ-11, intended to connect toprinting in color mode, the first page comes out in 12
telephone line and telephone. There is also a ventilationseconds, and the average printing speed of one page
grid and a door that hides the paper pulling mechanism.is 3.7 seconds. Again, this figure is consistent with the
The OKI MC360 can be connected to the PC in twospecifications declared by the manufacturer, the 16
ways - via USB and LAN. USB connection onlypages per minute.
requires selecting the type of connection andThe copying function is one of the most important
necessary drivers. LAN connection first requireswhen used in the working groups, and is provided in all
selecting the connection type and specifying themulti-function devices. OKI MC360 MFP allows you to
IP-address of the device. LAN connection makescreate black-and-white and color copies. There are
possible not only printing, but also scanning and sendingnumerous preferences for the office-oriented model;
faxes.you can choose one of four quality modes, the format,
For office equipment, the resolution of the scanner isset and delete margins, change boundaries, adjust
high enough - up to 4800 dpi. Naturally, a devicetoner intensity, etc.