PS Jailbreak: How to Jailbreak Your PS3 Using USB?

Do you have a PS3? If you do, then this might befirmware
good news for you. Just recently, a USB modchip 
called PS Jailbreak which is specifically intended for the3.41 or above.
PS3 has emerged. This USB modchip will definitely- PS Jailbreak USB Modchip (Can be easily purchased
allow unauthorized software as well as backups to runfrom
on your PS3. The PS Jailbreak is simply a plug and- An external USB drive formatted to FAT32 with the
play solution that can be installed in just a few seconds"Backup Manager" file on it which you can download
and since it is a USB, it keeps your warranty sealfrom here.
intact.- Original disc of any PS3 game which you want to
backup.
The PS Jailbreak is very easy to install and its GUI willStep 1: Power off your console and make sure that
guide you step by step. The said USB modchip is alsothere isn't any disc in the Blu-ray drive.
compatible on any firmware version and allows theFor the SLIM Model: Remove the power chord before
PS3 to run games as if it's a debug console.plugging in the USB.
Apparently, the PS Jailbreak can dump games on theFor the FAT model: Turn off the power switch found
internal and any external drive connected to the PS3at the backside of the console.
off the original discs.Step 2: Now insert the USB based PS Jailbreak
In order to jailbreak your PS3 you need the followingModchip to any USB port of your choice on the
(1) Any FAT or SLIM PS3 Console running theconsole. Once the USB is in place, Power ON the
firmware 3.41 above, (2) a PS3 Jailbreak Modchip,console and immediately press the "Eject" button.
(3)an external USB drive formatted to "FAT 32" thatThere should now be two LEDs turned-on on the USB
contains the file "Backup Manager",(4)Original disc ofas the console is loading.
any PS 3 game which you intend to back-up.If the LED light on the USB turns green, you are good
To jailbreak your PS3 simply follow these simple steps:to go as the PS Jailbreak has been successfully
1. Power off your console and ensure that there is noloaded.
disc in its Blu Ray drive.If the LED turns red, then it means that the PS
2. Insert the USB modchip to any USB port on theJailbreak Modchip didn't load successfully. This usually
console. Then turn on the console and immediatelyhappens when the Power and Eject button sequence
press the "eject" button. At this point you must be ablewasn't performed properly. Start from Step 1 again if
to see two LEDs turned- on as the USB loads.note:you end up having the red light.
Green light –means the China Wholesale PS
Jailbreak has been successfully loadedStep 3: Once the console has finished booting up with
Red light –means that the PS Jailbreak was notthe PS Jailbreak Modchip, plug-in the external USB
loaded successfullystorage device which has the "Backup Manager"
setup to the console's USB port.
3. Once the console is finished booting up, plug-in theStep 4: Now navigate to the "Game Menu" and select
external USB storage device which has the "Backupthe option "Install Package Files" and then select
Manager" setup to the console's USB port."manager.pkg" file. This will basically install the "Backup
4. Then navigate the "Game Menu" and select theManager" application that you download earlier to your
option "Install Package Files" then select thehard drive.
"manager.pkg" file in order to basically install the
"Backup Manager" applicationStep 5: When the "manager.pkg" file is done loading,
5. Scroll all the way down to the "Game Menu" and runscroll all the way down in the "Game Menu" and there
the "Back up Manager" applicationyou should see a new application called "Backup
6. Insert the game you want to back up in theManager", run it.
console's optical drive, then press "O". Then choose
where you want the backup to be located, whether onStep 6: Now we're in the Backup Manager app. Insert
the internal HDD or an external storage connected viathe game in the console's optical drive which you want
USB.to backup. Press "O" and you will be asked where to
7. To play a game via the backup you've created,make the backup, on the internal HDD or the external
insert any original game disc in your console, runstorage source connected via USB. This process is
"Backup Manager" then press X to play.further elaborated by the following screenshots.
8. Now you will be taken back to the Games Menu.
Now you can play the game without having the disc in
the console drive. Check out the demo clip below!Step 7: In order to play a game via the backup you
Few days ago we reported about a new USBjust made, insert any original game disc into your
Modchip called PS Jailbreak for PlayStation 3 whichconsole (To emulate the loading process), run "Backup
enables you to dump games off original discs on theManager" in the "Game Menu". Press "X" to play the
internal or any external drive connected to PS3.selected backup game.
Spanish site Elotrolado has a full blown review, along
with instructions on how you can use it to createStep 8: Now you will be taken back to the main menu.
backups of your PS3 games. This of course provesIn the "Game Menu" you will see the game which you
that PS Jailbreak works for real !have backed up. Now you can select the game, and
run it without having the disc in the console's drive.
Follow the complete step by step guide posted below
to jailbreak your PlayStation 3 to enable you to createOh and you must make sure that the PS Jailbreak
backups of original discs.USB Modchip is connected to your console at all the
Pre-requisites are as follows:times when you are playing the games via backups.
- Any (FAT or SLIM) PlayStation 3 Console running